Automation SCADA/EMS Engineer (PV + BESS)
- Джерело:
- djinni.co
Що робити
- Integrate field devices over Modbus TCP/RTU: read vendor register maps, find map errors, fill I/O mappings, and verify scaling and sign against the device manual
- Write and maintain IEC 61131-3 Structured Text under review, using existing reference modules and test plans
- Commission and test plants (FAT/SAT): execute test plans, log and close issues
- Test and diagnose the IEC 104 link and the OPC UA model (point lists, general interrogation, timestamps, drift checks)
- Troubleshoot in the field: serial counters, network captures, 4G/VPN, router logs
Що очікуємо
- 4+ years in industrial automation or energy controls (3 years considered with strong project evidence)
- IEC 61131-3, ideally Structured Text, on CODESYS-based (WAGO) or Phoenix Contact controllers, or a comparable runtime
- Hands-on Modbus TCP/RTU, plus at least one of IEC 104 / DNP3 / IEC 61850 and OPC UA basics
- Site commissioning and fault finding on live equipment; industrial networking basics (IP, VLAN, RS-485, VPN)
- Ability to read electrical schematics and meter data (CT/VT, power, sign conventions)
Що пропонуємо
- PV and/or BESS plant experience; EMS/PPC or PCS/BMS integration
- Knowledge of grid-code and DSO/TSO requirements (RfG, EN 50549, ANRE / Moldelectrica norms); ANRE authorization
- IEC 62443 awareness; Linux; bench simulators
- CODESYS or IEC 62443 training certificates
- How we work
Схожі вакансії
З блогу Trackr
Усі статті →
Знайдено через trackr.help/jobs · Канал: @trackrhelp · Бот для персональних сповіщень: @trackrhelpBot